EasyManua.ls Logo

Flare Fireplaces Flare 70 Series - User Manual

Default Icon
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
INSTALLATION AND SERVICE OF THIS APPLIANCE MUST BE
PERFORMED BY QUALIFIED CERTIFIED NFI PERSONNEL.
Massachusetts: The piping and final gas connection must be performed
by a licensed plumber or gas fitter in the State of Massachusetts. Also,
see Carbon Monoxide Requirements Detector requirements on page 55
For
Outdoor
Use Only
Improper installation, adjustment, alteration, service or maintenance can cause injury or property
damage. Read the installation, operating and maintenance instructions thoroughly before installing or
servicing this equipment
Flare Fireplaces Vent Free Outdoor Installation Guide
[Flare Double Corner, Left Corner, Right Corner, Front, See-Through and] v1.3
Question and Answer IconNeed help?

Do you have a question about the Flare Fireplaces Flare 70 Series and is the answer not in the manual?

Summary

Critical Safety Warnings

Carbon Monoxide Hazard

Appliance produces odorless, deadly carbon monoxide.

Gas Leak Detection and Response

Actions to take if you smell gas, including shutoff and evacuation.

Outdoor Use Only

Appliance is designed and must be used strictly outdoors.

Fireplace Safety Warnings

Carbon Monoxide Hazard Warning

Appliance produces odorless, deadly carbon monoxide.

Gas Safety and Leak Response

Procedures for gas leaks and general gas safety.

Outdoor Operation Mandate

Strict requirement for outdoor use only.

Safe Operating Practices

Hot Glass and Surface Burns

Warning about hot surfaces and burn prevention.

Installation and Maintenance Safety

Importance of proper installation and maintenance.

Appliance Usage Restrictions

Prohibited Uses and Fuel Storage

Restrictions on cooking, solid fuel, and fuel storage.

Installation and Handling Precautions

Enclosure and Clearance Requirements

Rules for surrounding construction and clearances.

Material and Operational Safety

Non-Combustible Material Usage

Specification for finishing materials.

Gas and Electrical Safety Protocols

Gas Connection and Leak Testing

Procedures for connecting and testing gas lines.

Electrical Wiring and GFI Protection

Requirements for safe electrical installation.

Risk of Shock or Explosion

Warnings related to electrical work.

Operational Safety and Maintenance

Conversion and Lighting Procedures

Appliance Lighting Procedure

Step-by-step guide for lighting the appliance.

Appliance Operation and Safety Features

Product Features and Certification

Safety and CSA Certification

Assurance of quality and safety standards.

Model Information and Installation Compliance

Installation Code Compliance

Adherence to local and national codes.

Installation Environment and Qualifications

Qualified Installer Requirements

Who can perform installation and service.

Outdoor Installation Site Selection

Enclosure Requirements for Combustion

Necessary provisions for air and ventilation.

Enclosure Types and Usage Restrictions

Strict Outdoor Use Mandate

Reinforcing the outdoor-only usage rule.

Drainage and Ventilation Planning

Clearance Requirements for Safety

Clearance to Combustible Framing

Minimum distances from framing materials.

Clearance to Combustible Finishing

Minimum distances from finishing materials.

Electrical Requirements and Controls

GFI Protection and Outdoor Wiring

Electrical circuit and junction box requirements.

Vent Free Fireplace Specifications

Installation Steps Overview

CSA Label and Model Information

Routine Maintenance and Safety

Component-Specific Maintenance

Warranty Policy and Coverage

Warranty Void Conditions and Exclusions

Flare Fireplaces Flare 70 Series Specifications

General IconGeneral
CategoryIndoor Fireplace
ModelFlare 70 Series
Remote ControlYes
ThermostatYes
Voltage120V
Safety FeaturesOverheat protection

Related product manuals