line
48 Maintenance check | Homologation Closing words 49
12 MAINTENANCE CHECK
At FLARE, the safety of our customers is our highest priority.
To maintain the flying characteristics of your FLARE LINE, it has to undergo
a maintenance check after 12 months, 30 flights or after 100 flight hours
(whichever occurs first). According to these regulations the Two-Year-Check
must be carried out by the manufacturer.
The check must be officially confirmed with a stamp. If this date is
missed, the FLARE LINE loses its guarantee. Airworthiness is, therefore,
not guaranteed.
IF THE PARAKITE IS SUBJECTED TO ABOVE AVERAGE WEAR AND
TEAR (EXTREME FLIGHT MANEUVERS, FORBIDDEN ACROBAT
FLIGHT MANEUVERS) OR IS USED FREQUENTLY IN SAND OR
SALTY AIR, IT SHOULD BE INSPECTED SOONER OR SHOULD
UNDERGO AN ADDITIONAL INSPECTION!
Changes to the parakite:
Your FLARE LINE is manufactured within the regulated parameters of
tolerance. These parameters are very narrow and must not be altered
under any circumstance. Only this way can the optimum balance be-
tween performance, handling, and safety be guaranteed!
UNAUTHORIZED CHANGES INVALIDATE THE TYPE APPROVAL
AND ALL LIABILITY CLAIMS AGAINST THE MANUFACTURER
ARE INVALIDATED.
13 HOMOLOGATION
The FLARE LINE is certified according to EN926-1.
The FLARE LINE underwent ‘only’ a shock- and load test. Check your local
regulations, whether it is legal or not to use the FLARE LINE in your country.
EN
14 CLOSING WORDS
The FLARE LINE will provide you plenty of joy over many years if you treat
and care for it properly. Respecting the demands and dangers of flaring is
essential for successful and beautiful flights. Make sure to watch all FLARE
Tutorials at go-flare.com and respect your limits. The question is not how
stable the FLARE LINE is; the question is how stable you can personally
make it by active piloting.
WE WISH YOU MUCH FUN WITH YOUR FLARE LINE
AND HAPPY FLARING!
Your FLARE Team
To Next Page
Loading...