Flash-e-Vapor V4.5/V4.5L — Instruction
manual
Changing the connecting pieces
In order to change the connecting piece,
unscrew the air duct from the tank top cap
using a 1 cent coin
.
Remove the tank bottom cap together with the
air duct. Now remove the connecting piece from
the tank to cap.
Insert the new connecting piece part into the
tank to the top cap, attach the tank bottom cap
together with the air duct and fasten.
Make sure that the connecting piece is introduced
into the grooves of the top or bottom cap.
In the delivery state, the tank is completely
assembled with a connecting piece made from
borosilicate 3.3 glass. Optionally, you can install
the included connecting pieces made from
stainless steel or polycarbonate.
To Next Page
Loading...