Flash Furniture Mid-Century Modern Love Seat User Manual

Thank you for your purchase!
Customer Service Email: CustomerExperience@belnick.com | Phone: 866-552-2810
IS-VL100-GY-GG / IS-VL100-BR-GG
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may
result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The
tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall
Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Mid-Century Modern
Love Seat

Flash Furniture Mid-Century Modern Love Seat Specifications

General

Style	Mid-Century Modern
Seating Capacity	2
Assembly Required	Yes
Type	Loveseat
Material	Fabric

Summary

Assembly Instructions Overview

Before You Begin

Guidance on identifying component parts and hardware before starting assembly.

Safety Precautions and Warnings

Covers general cautions, choking hazards, and critical warnings about furniture tipping.

Customer Support and Warranty Information

Customer Service Contact

Provides email and phone number for product questions or issues before requesting a return.

Warranty Statement Details

Outlines coverage for manufacturing defects, warranty periods for parts, and exclusions.

Product Parts and Hardware

Hardware Components

Lists all hardware items including bolts, lock washers, and the allen wrench.

Assembly Steps

Step 1: Prepare Sofa Frame

Unzip the liner under the sofa frame and remove all components.

Step 2: Prepare Sofa Legs

Insert wood dowels into the upper holes of the front and back sofa legs.

Step 3: Attach Sofa Legs

Securely attach the sofa legs to the underside of the sofa seat using bolts.

Step 4: Attach Side Panels

Connect the right and left side panels to the receiver brackets on the sofa.

Step 5: Final Cushion Placement

Slide the back panel into place and arrange back and bolster cushions.