Flavel Arundel MK2 - Stove Technical Specifications; Model, Fuel, and Output Data; Efficiency, Standards, and Certification

Information Requirements for Commission Regulation (EU) 2015/1186
Model Identifier FCMBS2
Indirect Heating Functionality No
Direct Heat Output 4.9kW
Indirect Heat Output Not Applicable
Fuel Wood logs with moisture content
<25%
Other Suitable Fuels Compressed wood with moisture
content <12%, Anthracite and dry
steam coal, Low temperature coke,
Lignite briquettes, Peat briquettes,
Blended fossil fuel briquettes.
Nominal Heat Output (Measured) 4.9kW
Minimum Heat Output (Indicative) 3.0kW
Seasonal / Useful Efficiency at Nominal Heat Output 76.3%
Useful Efficiency at Minimum Heat Output (Indicative) 50.0%
Energy Efficiency Index 101%
Auxilliary Electricity Consumption at Nominal Heat Output Not applicable
Auxilliary Power Consumption at Minimum Output Not applicable
Auxilliary Power Consumption at Standby Mode Not applicable
Permanent Pilot Flame Requirement Not applicable
Type of Heat Output / Room Temperature Control Single stage heat output, no room
temperature control
Harmonised standard applied BS EN 13240:2001+A1:2004
Notified Body BSRIA Notified body number 0480
Contact Details BFM Europe Ltd.
Gordon Banks Drive
Trentham Lakes North
Stoke-on-Trent
ST4 4TJ
Tel : 01782 339000
Page 2 of 18