11
GB
Make sure your dishwasher is perfectly
level using the adjustable feet.
When the appliance is correctly
levelled, the door will not catch on the
inner liner on either side of the cabinet.
If the door does not close correctly,
loosen or tighten the adjustable feet,
until the machine is perfectly level.
Ensure that door furniture is fitted
properly and check that the door does
not catch any other surface to ensure
the door is closed smoothly.
5
How to use
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness
will possibly be different. It is essential to reset the water
hardness in order to obtain optimum washing efficiency.
Test Strip
Let the water
flow from your
tap for 1 minute.
Remove the
test strip from
its packing.
Fill a glass with
tap water and
dip the test strip
into water for 1
second.
Take the test strip
out of the water and
shake it.
Hold for
1 minute.
Set the water hardness level of your dishwasher
according to the result shown by the test strip.
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
To Next Page
Loading...