EasyManua.ls Logo

Flavel MISERMATIC FORM series User Manual

Flavel MISERMATIC FORM series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MISERMATIC
BATTERY IGNITION RADIANT CONVECTOR GAS FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No’s FORM**EN are for use on Natural Gas (G20) at a supply
pressure of 20 mbar in G.B. / I.E.
** denotes colour variance
Question and Answer IconNeed help?

Do you have a question about the Flavel MISERMATIC FORM series and is the answer not in the manual?

Flavel MISERMATIC FORM series Specifications

General IconGeneral
CategoryGas Heater
ModelMISERMATIC FORM series
Fuel TypeNatural gas or LPG
ThermostatBuilt-in thermostat
Safety FeaturesOxygen depletion sensor (ODS)
WeightApprox. 10-15kg
InstallationProfessional installation required

Summary

CONDITIONS OF INSTALLATION

Great Britain Installation Requirements

Outlines legal requirements and British Standards for installation in GB.

Republic of Ireland Installation Requirements

Specifies installation rules for Ireland, referencing IS 813:1996.

FLUE AND CHIMNEY SUITABILITY

Minimum Flue Dimensions

Lists minimum diameter, effective height, and cross-sectional area for flues.

FIREPLACE / SURROUND SUITABILITY

Hearth and Wall Mounting Criteria

Defines suitable hearths and wall mounting conditions for the appliance.

SHELF POSITION GUIDELINES

Combustible Shelf Clearance

Specifies minimum distances for shelves above and around the appliance.

FLUE / CHIMNEY INSPECTION

Pre-Installation Chimney Checks

Procedures for inspecting flue/chimney for obstructions and condition.

SPILLAGE MONITORING SYSTEM

ODS Pilot System Warnings

Important warnings regarding the adjustment and maintenance of the spillage monitoring system.

GAS CONNECTION

Making the Gas Supply Connection

Guidance on safely connecting the gas supply using 8mm tubing.

GAS TIGHTNESS

Performing Gas Tightness Test

Steps for testing gas tightness and checking pressure.

LIGHTING THE APPLIANCE

CHECKING FOR CLEARANCE OF COMBUSTION PRODUCTS

Spillage Test Procedure

How to conduct a spillage test using a smoke match.

MAINTENANCE INSTRUCTIONS

Servicing Notes and Frequency

Guidelines for annual servicing by a qualified engineer.

OPERATING THE FIRE

Pilot and Main Flame Ignition

Step-by-step guide to lighting the pilot and main burner.

Related product manuals