Flavel Renaissance - Installation

2
Installation
IMPORTANT Please read the instructions below before installation or use of this
Flavel Electric Heater.
NEVER
use this heater where it may come into contact with water i.e. bathroom,
shower room, kitchen.
NEVER
leave unsupervised children where the heater is left switched ON or is left
unguarded.
NEVER
use this heater beneath a fixed socket outlet.
NEVER
cover or obstruct the outlet, as this will cause the appliance to overheat.
NEVER
install the heater close to combustible materials i.e. curtains or similar.
Allow a minimum of one metre around the heater.
NEVER
route the mains cable beneath carpet.
NEVER
use aerosols or similar close to the heater.
NEVER
use the heater to dry clothes or similar.
NEVER
use the heater by means of an automatic control or timer, as this may cause
risk of fire if the heater is moved or covered.
NEVER
fit the heater directly onto carpet or similar material. It should be fitted onto a
suitable non-combustible hearth
The appliance MUST be disconnected from the mains supply before commencing cleaning, or
maintenance.
Ensure the heater is firmly secured to the fixing plain to prevent it from falling forward.
Use a suitable fireguard to protect both the infirm and young children who could come into
contact with the heater.
Appliance Data
Supply Voltage 230V ac 50Hz Fuse Rating 13 Amp
Heating Element 2 x 1kW Mains Cable 1 x 2M PVC 1mm
2
Cable
Illumination 2 x 60W Clear Filament Bulb