BREWING YOUR BEVERAGES
Open the Pack Door by rotating the Top Ring a quarter turn counter
clockwise.
Do not attempt to open or close by the Pack Door itself.
Insert the pack in to the Brew Head.
Push the pack fully in to the Brew Head until it“clicks” into position.
Close the Pack Door fully by rotating the Top Ring a quarter turn
clockwise.
When closing the door you will feel some resistance, this is only the seal
of the pack being pierced and is perfectly normal.
Place a cup or mug on the Cup Stand.
Use a mug or cup of the correct size for the beverage.
To minimize the risk of splashing,position the Brew Head
as close to the top of the cup or mug as possible.
Press a Selection Button.
Press the middle button for all Coee, Tea and Wellbeing beverages.
Press the right button for all 2-pack beverages (e.g. Cappuccino).
Press the left button for Choco and other beverages.
11
To Next Page
Loading...
