EasyManua.ls Logo

Flavour Blaster PRO 2 - SAFETY; General Safety Guidelines

Flavour Blaster PRO 2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
14
SAFETY
ALWAYS STORE THE FLAVOUR BLASTER IN AN UPRIGHT POSITION:
THIS WILL PREVENT ANY LIQUIDS ENTERING INSIDE THE CASING.
POWERING THE FLAVOUR BLASTER ON & OFF:
Press the Trigger three times in quick succession to turn on the Flavour Blaster.
Press the Trigger three times in quick succession to turn off the Flavour Blaster.
Always power off the Flavour Blaster when it is not being used and remove the Tank.
8 SECOND CUT OFF:
If Trigger is pressed for 8 seconds Flavour Blaster will stop ring until Trigger is released and pressed again.
TANK:
Do not pour alcohol into tank, this can cause fire.
Tank / Coil will get hot during use so ensure Tank is allowed to cool down before removing Tank from Blaster.
SHIPPING & TRAVELLING:
Remove Tank when shipping or traveling to pr
event Tank activating if Flavour Blaster inadvertently turns on.
Follow rules regarding shipping or traveling with a device with 2 permanently installed Lithium Ion Batteries.
The Batteries are not removable or loose in the device.
SHORT CIRCUIT PROTECTION:
Short Circuit Protection prevents the Flavour Blaster against short circuiting and will stop the unit from functioning in
unsafe conditions. The Flavour Blaster features automatic real-time Tank Ohms detection.
OVER CHARGE PROTECTION:
Flavour Blaster monitors the battery voltage and will automatically power off when the battery is over charged.