Unpacking & assembly
Packing in original box
In the event that you have to repackage
your bike in its original box to send it to
Flebi's technical service, we recommend
that you follow the steps below to protect
it as best as possible and avoid bumps and
scratches during transport:
- Cover the parts with protections
- Remove the seat post and remove the
handlebar assembly
- Fold the bike (see 15)
- Put it in the box
- Place the cork fixing the front wheel
- Rest the pedal on a protection
- Put the front folding lever inwards
3Video: https://youtu.be/4y2VZKfr4pA
To Next Page
Loading...
