Start up
Disc brake adjustment Tektro
CAUTION: The brakes on the Supra 3.0/3.0+
are fully adjusted at the factory and no
adjustment is necessary unless they loosen
with use.
To adjust the mechanical disc brake, we will
first loosen the mounting bolts, to allow
some movement for the caliper.
Then, you will have to act on the regulator of
the pad on the inside.
Finally, you must press the brake to take up
the slack in the cable and thus compress the
caliper on the disc to align it, without
releasing the brake cable.
6Video: https://youtu.be/zNEUnS3a_Uc
To Next Page
