STOWING THE KOMBI CLASSIC LINE MARKER
When the machine has been flushed and cleaned, prepare the Kombi
Classic line marker for transport or storage as follows:
1. Squeeze nozzle height adjustment spring collar and slide the nozzle
post down to the minimum height.
2. Using the spring collars, slide the line guide discs in, so that they
support the nozzle assembly centrally.
3. Loosen knib retainer clip and lift the knib from the tapered post.
4. Park the knib onto the bonnet horn.
5. The Kombi Classic line marker is now ready for transportation and/or
storage.
Storage
14
To Next Page
Loading...