Need help?Do you have a question about the FLEET Kombi Classic and is the answer not in the manual?
General| Brand | FLEET |
|---|---|
| Model | Kombi Classic |
| Category | Industrial Equipment |
| Language | English |
Steps to prepare the Kombi Classic Line Marker before assembly.
Steps for assembling the knib and nozzle components.
How to mount the knib and nozzle assembly at the front of the machine.
Instructions for mounting the knib to the side of the machine.
Steps for filling the water tank with clean water.
How to use the flow return tap for mixing and bleeding air.
Adjusting the line width for optimal paint usage and line quality.
Adjusting the nozzle height for desired line width and spray pattern.
Step-by-step guide for marking straight lines with the machine.
How to mark circles using the designated eyelet and guide.
Daily routine for flushing the machine before breaks or at the end of the day.
Weekly procedure for thoroughly flushing the entire machine system.
Information on recommended accessories for maintenance.
Description of the ultrasonic cleaner for nozzle maintenance.
Description of Kombi Klean for flushing the machine.
Steps to prepare the machine for transport or storage.
Instructions for removing and replacing quick connectors.
Instructions for removing compression fittings.
To Next Page