Flex ADM 60 Li Instructions For Use

FLEX ADM 60 Li
13
Control panel
14 Measuring mode button
Selector button for different procedures
15 Plus button for addition measurement
16 Timer button
To avoid shaking during measurement
17 Save button
18 Switch on button and measurement button
19 Minus button for subtraction measurement
20 Measuring point and measuring unit (m, ")
(ft, in) adjustable
21 Measure largest and smallest dimension
22 Switch off button and delete last
measurement
Technical specifications
–
* The measurement range may be less under
unfavourable conditions (bright sunlight, reflec-
tive surfaces). It is recommended to use a laser
target plate (optional).
Laser range finder ADM 60 Li
Visible laser diode 635 nm
Laser class 2
Measurement range * 0.2–60 m
Precision * ± 2 mm
Smallest display size 1 mm
Lithium polymer battery 500 mAh / 3.7 V
Operating duration
Individual measurements (number) ≤ 5000
Automatic switch-off
– Laser beam
– Measuring instrument
20 s
300 s
Temperature range
– for operation
– for storage
0 °C ... 40 °C
–20 °C ... 70 °C
Weight 0.133 kg
USB charger
Input voltage 100-240 V~
Output voltage
5V / 1A

Flex ADM 60 Li Specifications

General

Brand	Flex
Model	ADM 60 Li
Category	Measuring Instruments
Language	English