10 English
Î Release and remove the suction head.
Î Attach disposal bag.
Î Pull disposal bag over the container.
Î Insert and lock the suction head.
Î Remove the brush strips (4).
Î Insert the rubber lips (5).
Note
The structured side of the rubber lips must
point outwards.
Î Close and remove disposal bag.
– To suck wet dirt, always remove the
closeable disposal bag (optional).
몇 Warning
The flat pleated filter must must always be
in place while vacuuming.
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is
sucked up from a container, it is recom-
mended to deactivate the "automatic fil-
ter cleaning" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– After having completed the wet vacuum
operation clean the flat pleated filter,
the electrodes and the container and let
dry.
Installing disposal bag, closeable (op-
tional)
Wet vacuum cleaning
Inserting the rubber lips
Removing disposal bag, closeable (op-
tional)
To Next Page
Loading...
