English 11
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
Î Plug in the main plug.
Î Turn on the appliance.
Î Set the suction output (mix - max) at the
rotary switch.
Î Connect the mains plug of the electric
power tool to the vacuum cleaner (3).
Î Turn on the appliance (1).
Lamp is on - vacuum cleaner is in the
standby mode (2).
Note
– The vacuum cleaner is turned on and
off automatically with the electric power
tool.
– The vacuum cleaner starts automatical-
ly within 0.5 seconds and continues to
run for 15 seconds after the power tool
has been switched off.
– Please refer to "Technical specifica-
tions" for the power connection specifi-
cations of the power tools.
Î Adjust the stepped power tool adaptor
to fit the connection of the electric pow-
er tool.
Clip connection
Operation
Turning on the Appliance
Adjust the suction output
Working with electrical power tools
To Next Page
Loading...
