Flexcom Kommunikációs Kft Üzembehelyezési és használati útmutató (2021/10/14)
21/25
Description SMS message Device response
You can set the device to send an SMS
alert if the vehicle speed exceeds the
specified limit. The speed limit must be
given in the form XXX, if less than 100,
the leading zero must also be written
out (eg 070).
Turning on: speed123456
sebességhatár
For example: speed123456 070
Content of the alarm message:
„Speed alarm!”
Turning off: nospeed123456
Speed Ok or
Nospeed Ok
Vibration alarm
Description SMS message Device response
Send an alarm to the phone when the
device is moved / shocked / shaken.
For this to work, the device must be at
rest for at least 5 minutes before
exposure.
Turning on: shock123456
Content of the alarm message:
„Sensor alarm”
Turning off: noshock123456
Shock OK or
Noshock Ok
Battery status indicator
Description SMS message Device response
You can set an alarm in case the
battery level drops too low.
Turning on: lowbatsms123456
on
Turning off: lowbatsms123456
off
“lowbat sms on” or
“lowbat sms off”
Flexcom
To Next Page
Loading...
