FLEXI STORAGE CLEVER CUBE User Manual

1 x 2 STORAGE UNIT
ASSEMBLY INSTRUCTIONS
1
THIS PRODUCT SHOULD BE ANCHORED TO A WALL OR OTHER SUITABLE
SURFACE TO AVOID SERIOUS INJURY OR DEATH.
To help avoid any serious injury or death, this product includes a bracket to prevent toppling. We strongly
recommend that this product be permanently fixed to the wall or other suitable surface. Fixing hardware is not
included since different surface materials require different attachments. Please seek professional advice if you
are in doubt as to which fixing hardware to use. Regularly check your fixing device.
Care Instructions: We recommend to wipe over with a dry micro-fibre cloth to remove any dust.
Avoid using a damp or wet cloth and any cleaning chemicals as this may cause damage to the surface.

FLEXI STORAGE CLEVER CUBE Specifications

General

Brand	FLEXI STORAGE
Model	CLEVER CUBE
Category	Indoor Furnishing
Language	English

Summary

Product Safety and Wall Anchoring

Mandatory Wall Anchoring Warning

Warning to anchor the product to a wall to prevent serious injury or death.

Product Care Instructions

Cleaning Recommendations

Wipe with a dry micro-fibre cloth; avoid damp cloths and cleaning chemicals.

Assembly Elements and Hardware

Component Identification

Lists and illustrates the different elements and hardware required for assembly.

Assembly Steps

Step 1: Initial Assembly

Connects elements 2 and 3 using hardware A.

Step 2: Structural Assembly

Assembles the main frame using elements 1 and 2 with hardware A and B.

Step 3: Final Assembly and Wall Mounting

Attaches the back panel and prepares for wall mounting using hardware D, E, and F.