Flexispot Deskcise Pro V9B - Assembly Step 2; Assembly Step 3; Assembly Step 4; Assembly Step 5

Assembly step 4
Insert the anti-skid pad into the cup holder.
Cup holder
3
Assembly step 3
Insert desktop (B) into the bike base (A), locking the screw on the base firmly with a screw (1)
using a hex key (2).
2
M8x35 Bolt
-04--03-
Assembly step 2
Outspread both left and right pedals until you hear the sound "Pa".
Assembly step 5
Slip the pedal cover into each pedal so that you can use the bike even you are barefoot.
Barefoot
4
"Pa"
left pedal
Set the pedal flat