Need help?Do you have a question about the Flexispot E7 and is the answer not in the manual?
Power and USB Specifications| USB output QC2.0 voltage | 5.0 V |
|---|---|
| USB output QC3.0 voltage | 9.0 V |
| USB output voltage | 12.0 V |
| USB output current | 1.0 A |
Attach the side brackets to the ends of the supporting beam using screws as shown with the Allen Key.
Insert the lifting columns into the ends of the supporting beam and fix with screws using the Allen Key.
Place the feet on the bottom of the lifting column and fix with screws using the Allen Key.
Adjust supporting beam expansion distance. Special method for beams over 1720mm.
Install the control panel according to the diagram.
Install tray using screws. Special method for beams over 1720mm.
Lists common operational faults and their corresponding troubleshooting methods.
Key points regarding power supply, service environment, cleaning, and usage precautions.
Instructions on responsible disposal of the product to prevent environmental harm.
Overview of the desk's physical components and the function of each control button.
Instructions on how to adjust desk height and save preferred positions.
Details on using the USB charging port and adjusting collision prevention sensitivity.
How to activate/deactivate child lock and perform system resets for troubleshooting.
To Next Page
