What to do if the fans are not working on my Flexit Ventilation Hood?
If the fans in your Flexit Ventilation Hood aren't working, first ensure the unit is receiving power. Next, verify the overheating thermostat hasn't tripped; if it has, reset it by pressing the button and correct it on the automatic control panel. Lastly, confirm the unit hasn't been accidentally set to the stop position.
Why is my Flexit Spirit K2 Ventilation Hood causing cold draughts?
If you're experiencing cold draughts with your Flexit Ventilation Hood, verify the selected supply temperature on the operating panel. Also, check that the rotor is rotating and the heating is functioning. A new extract filter might also be needed.
How to increase air volume in my Flexit Spirit K2 Ventilation Hood?
If your Flexit Ventilation Hood has low air volume, check the unit's speed setting. Ensure the filters are fitted tightly and inspect the intake grille.
Guidance on filter replacement and its importance for air quality.
How to adjust fan speed and air flow using switches.
Using potentiometers to adjust supply and extract air levels.
Setting the desired supply air temperature and controlling additional heating.
Reminder for filter replacement and where to find more information.
Explanation of alarm indicators and their meanings.
Procedure to reset alarms after maintenance or repair.
Accessing settings for adaptation and customization of the system.
Setting the temperature for the supply air entering the building.
Managing filter reminders, adjusting intervals, and resetting alarms.
Understanding alarm triggers and information text for troubleshooting.
Accessing functions for monitoring, configuration, and troubleshooting.
General| Category | Ventilation Hood |
|---|---|
| Brand | Flexit |
| Model | Spirit K2 |
| Lighting | LED |
| Control Type | Electronic |
| Voltage | 230 V |
| Frequency | 50 Hz |
To Next Page
