FLEXSTEEL Sectional - Page 5

USA0708
To remove the Back (A), disconnect the headrest and lumbar motor connections behind the back flaps and
unzip the zipper between the back (A) and the seat (B). Pull up on the leaf springs attached to the brackets,
and lift the back (A) away from seat (B). (See Figure 8)
Important Notes
· To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately.
· If the reclining functions are not working properly, check for loose cable connections before contacting the retailer.
Disassemble Back 5/5
Figure 8