EasyManua.ls Logo

Fliegl ASW 391 - User Manual

Default Icon
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating instructions
ASW push-off trailer
GB
We are Fliegl.
Translation of original operating instructions

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Fliegl ASW 391 and is the answer not in the manual?

Summary

1. User instructions

2. Basic safety instructions

2.1 Designated use

Specifies the intended use of the machine and conditions for safe operation.

2.2 Reasonably foreseeable misuse

Lists examples of misuse and associated dangers, emphasizing manufacturer non-liability.

2.10 Personal protective equipment

Lists required PPE and emphasizes the need for complete and functional safety devices.

2.14 Danger areas

Defines danger areas, minimum safety distances, and actions to take when persons enter.

3. Description of the machine

3.4 Layout of the machine

3.5 Assemblies and components

4. Transport and installation

4.2.2 Establishing the electrical connection

Details lighting, control panel, and ISOBUS connections, emphasizing proper installation.

4.2.3 Compressed air supply

Explains connection and disconnection procedures for compressed air supply lines.

4.2.4 Establishing hydraulic connections

5. Start-up

5.1 First-time start-up

Outlines crucial steps and safety precautions for initial machine start-up.

5.2 Check before start-up

Lists essential checks for trailer start-up, including safety devices and fluid levels.

6. Preparation and setup

6.1 Draw gear

Describes the three main variants of draw gear: top/bottom attachment, sprung, and drawbar.

6.1.5 Installing forced steering on the towing vehicle (optional)

6.2 Setting up the forced steering (optional)

6.3 Pressurised air suspension (optional)

6.4 Compressed air brake system

6.4.1 Brake system with manual control valve

Explains selecting operating mode and adjusting trailer load status via the control valve.

6.4.2 Brake system with ALB, brake force regulator

Discusses setting brake force based on trailer load and not altering ALB regulator settings.

6.4.3 Brake system - release valve

Describes the function of the release valve for reversing automatic braking.

6.4.4 Brake system with combined service;parking brake (Tristop)

Details parking and manoeuvring valve operation for service and spring-loaded brakes.

6.5 Hydraulic brake (optional)

6.6 Parking brake

Covers parking brake use, adjustment, and prevention of rolling.

6.7 Hydraulic system

6.8 Setting the flow control valve;potentiometer (optional)

6.8.3 Manual emergency operation of the hydraulic control

Details manual emergency operations for single and dual-action control units.

6.9 Drive shaft for attachment (optional)

6.10 Electrical systems

7. Use and operation

7.1 Trailer operation

Provides general notes on trailer operation, coupling, and manoeuvring safety.

7.1.1 Before operation

Lists checks before operation, including safety devices and fluid levels.

7.1.3 Coupling the trailer

Details the step-by-step process for coupling the trailer, including connections.

7.1.4 Attaching the drive shaft (optional)

7.1.5 Detaching the drive shaft (optional)

7.1.7 Conducting a trial run

7.2 Working with the machine

7.2.1 General safety and operating instructions

Lists key points for safe operation, including load limits, parking, coupling, and danger areas.

7.2.2 Loading the trailer

Covers risks of overloading, observing total weight, and compression process with pressure valve.

7.2.3 Emptying the trailer

7.3 Chassis lock

7.3.3 Using the chassis lock

Provides procedures for unloading, locking, and loading the body using chassis locks.

7.4 Loading and unloading swap bodies

7.4.2 Attaching the lifting cylinders to the swap chassis

Guides on attaching hydraulic lifting cylinders to the swap chassis and bleeding the system.

7.4.3 Using the supporting feet

Details sliding, locking, and adjusting supporting feet, warning against crushed hands/feet.

8.3 Supporting mechanism

8.5 Moving panel and sliding floor

8.7 Axle adjustment

8.8 Air suspension (optional)

8.9 Steered trailing axle

9.8.2 Speed Cover roll net

9.8.3 TopLift hydraulic folding roof

9.8.4 Toplift light hydraulic folding roof

9.9 Tyre pressure control system

9.9.3 Compressor unit for tyre pressure control system

9.10 Fliegl Trailer Control (FTC)

9.11 Fliegl weighing system FWS ISOBUS

10. Service and maintenance

10.3 Fliegl VIN (vehicle ID number) and type plate

10.4 Operational maintenance

10.4.1 General instructions for maintenance

Lists maintenance tasks for chassis, body, and accessories with intervals.

10.4.2 Cleaning the vehicle

10.4.3 Corrosion protection

10.4.4 Lubrication schedule

10.4.5 Tyres and wheels

10.5 Maintenance of the brake system

10.6 Checking the seals on the moving panel and sliding floor

10.7 Maintenance of the tyre pressure control system (optional)

10.8 Troubleshooting and fault elimination

10.8.1 List of warning and fault signals

Lists faults like lighting issues, slow tool movement, and hydraulic cylinder problems with solutions.

10.9 Decommissioning

11. Brake system

12. Electrics

13. Screw tightening torques

14. Schematic - tyre pressure control system

14.2 Electro;pneumatic diagram - tridem

15. Axles

15.2 Axle maintenance work

16.2 Safety and operating conditions of the drive shafts

16.3 Maintenance information

Fliegl ASW 391 Specifications

General IconGeneral
BrandFliegl
ModelASW 391
CategoryFarm Equipment
LanguageEnglish

Related product manuals