Programming Menu
6
2. Flashlight settings: You can set the default intensity for the HIGH and
LOW flashlight. Press MENU at the Flashlight settings option and then
press MENU at the HIGH or LOW option. Then use the arrows to select
the desired default intensity in percent (%).
3. Auto Power OFF (APO): Use the arrows to scroll and MENU to select the
desired APO time (5/15/30 minutes). Set to ‘NEVER’ to disable APO.
• GENERAL SETTINGS
1. Temperature Unit: Use the arrows and the MENU button to select °C or °F.
#NAS100007; r. AA/59809/59809; en-US
15
To Next Page
Loading...
