General description
The FLIR K2 is a robust and reliable infrared camera designed to perform under
extremely severe conditions. The FLIR K2 has an intuitive interface with a design that
makes it easy to control even with a gloved hand.
Benefits:
• Robust and reliable: The FLIR K2 is designed to meet tough operating conditions.
It can withstand a drop from 2 m (6.5 ft.) onto a concrete floor, is water resistant to
IP67, and is fully operational up to 55°C (135°F), and operational up to +85°C
(+185°F) for 15 minutes, +150°C (+302°F) for 10 minutes, and +260°C (+500°F)
for 3 minutes.
• Innovative: The FLIR K2 utilizes our patented technology MSX, where a thermal
sensor is combined with a visual camera sensor to give detailed image information
in many user situations.
• Easy-to-use: Easily used in a gloved professional hand. An intuitive and simple
user interface allows you to focus on the job. The FLIR K2 can be controlled by just
one large button on top of the unit.
Typical applications:
• Heat detection.
• Search and rescue.
• Final extinction.
• Back-up camera.
• Scanning camera.
• Fire attack.
Imaging and optical data
IR resolution 160 × 120 pixels
Thermal sensitivity/NETD < 100 mK @ +30°C (+86°F)
P/N: 73701-0101
Copyright
© 2015, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: 73701-0101
Release:
Commit: 26407
Language: en-US
Modified: 2015-06-04
Formatted: 2015-06-08
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Telephone: +1-503-498-3547
Website
http://www.flir.com
Customer support
http://support.flir.com
Disclaimer
Specifications subject to change without further
notice. Camera models and accessories subject
to regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
1 (9)
www.flir.com
To Next Page
Need help?
General
