P/N: 73701-0101
© 2015, FLIR Systems, Inc.
#73701-0101; r. /26407; en-US
Measurement analysis
Spotmeter
1
Automatic hot detection
Heat detection mode (the hottest 20% of
the of scene is colorized)
Isotherm Yes
USB
USB USB Micro-B
Compatibility
Compatible with FLIR software
FLIR Tools
Data communication interfaces
Interfaces Update from PC devices
Power system
Battery type Li ion
Battery voltage 3.6 V
Battery capacity
2.6 Ah at 20–25°C (68–77°F)
Battery operating time
Approximately 4 hours at +25°C (+77°F)
ambient temperature and typical use
Charging system
Battery is charged inside the camera or
in a dedicated charger
Charging time
2.5 h to 90% capacity, charging status
indicated by LEDs
Charging temperature 0–45°C (32–113°F)
Power management Automatic shutdown and sleep mode
Start-up time from sleep mode
10 seconds
Start-up time
30 seconds
Environmental data
Operating temperature range
• –10°C to +55°C (+14°F to +131°F):
infinity
• +85°C (+185°F): 15 minutes
• +150°C (+302°F): 10 minutes
• +260°C (+500°F): 3 minutes
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30, 24 hours, 95% relative
humidity, 25–40°C (77–104°F), 2 cycles
Relative humidity
95% relative humidity, 25–40°C (77–104°
F), non-condensing
EMC
• EN 61000-6-2:2005 (immunity)
• EN 61000-6-3:2011 (emission)
• FCC 47 CFR Part 15 B (emission)
3 (9)
www.flir.com
To Next Page
Loading...
