SECTION 5. MAINTENANCE
5.1 SOFTWARE UPDATE
Software updates for your LS-X/R can be
found at:
5.2 BATTERY SERVICE AND
REPLACEMENT
If the battery will not hold a charge and requires
replacement, please contact FLIR Systems for
details on returning the unit for service.
For instructions on charging the battery refer to
Section 2.3 Charging the system.
5.3 CLEANING THE LS-X/R
Wipe the housing with a damp cloth, as needed.
Use a high quality lens wipe to remove dirt or
smudges from the lens and display window.
Do not use abrasives or solvents to clean the
housing, lens, or display window.
5.4 CAUTIONS
• Do not disassemble the monocular enclosure.
Disassembly can cause permanent damage.
The battery is not user-replaceable
• Do not point the monocular at high-intensity
radiation sources, such as the sun, lasers, or
arc welders
• Do not leave fingerprints on the monocular’s
infrared optics. Clean only with low pressure
fresh water and a lens cloth
• All service must be provided by the
manufacturer
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
