DocumentIdentifier:MR06_MR07_MR08‐mulV1.509/15
Copyright©2015FLIRSystems,Inc.www.flir.comForadditionallanguagesvisitwww.flir.com/test
MR06
12345
12
3456
2
MR07
MR06,MR07,&MR08‐USERGUIDE
Introduction
ThankyouforselectingtheFLIRMoistureMeterProbeMR06(w allcavityprobe),MR07
(hammerprobe),orMR08(hammer/wallcavitycombo).Connecttheprobetoamoisture
meter(FLIRMR77,MR160,orMR176)tomeasuremoistureinwood&otherbuildingmaterials.
SafetyInstructions
Thisdeviceshouldbeusedonlyforpurposesoutlinedinthisguide.Misusemaycause
damagetotheprobeand/orexternaldevices,andcancausepersonalinjury.
Keeptheprobepackedwhennotinuse.
Donotallowchildrentohandletheprobeorthepins.
MR06WallCavityProbeDescription
1. Strikeplate
2. Handlegrip
3. BNCcablejack
4. PinProbehead
5. Removableprobepins
MR07HammerProbeDescription
1. Knobhandle
2. Strikeareas
3. Slidehammer
4. BNCcablejack
5. PinProbehead
6. Removableprobepins
7. DetachableRJ45toBNCconnector
Note:MR08kitassemblyincludesallMR06&MR07components
OperatingInstructions
Carefullyremovetheprobeandpinsfromthepackaging(extrapinsareprovided).
Screwthepinsintotheprobeandusethesuppliedwrenchtosecurelytighten.
ConnecttheprobetothemoisturemeterusingthesuppliedBNC/RJ45cable(BNC
connectiononprobeandRJ45connectiononFLIR
moisturemeters).
Positionthepinsonthematerialundertest.
Drivethepinsintothematerialundertestusingtheslidinghammeractionforcetoassist
(forMR07&MR08).FortheMR06useahammerorothertooltodrivetheprobepins.
OperatetheFLIR
MoistureMeterasdescribedintheUserGuidesuppliedwiththemeter.
Specifications
CableLength 2.45m(8’)cablelength
Pinlengths 50,101,or152mm(2,4,or6”)
Replacementpins PartNo.MR‐PINS2,4,or6(2,4,6”);2”10‐pack:MR‐PINS2‐10
Warranty
FLIRSystems,Inc.warrantsthisdevicetobefreeofdefectsinpartsandworkmanshipfor2(two)yearsfromdateofshipmentproviding:
DeviceispurchasedfromFLIRCommercialSystemsoranAuthorizedreseller
Deviceisregisteredonlineatwww.flir.com/test/warr antywithin60daysofshipment
FLIRis notifiedwithin30daysofadefectbeingfound
ContactFLIRReturnMaterialAuthorizationbeforereturningtheproductforaReturnAuthorizationnumber
Thesenderisresponsibleforshippingcharges,freight,insuranceandproperpackagingtopreventdamageintransit.
This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of specification,
impropermaintenanceorrepair,orunauthorizedmodification.
FLIRSYSTEMS,INC. SPECIFICALLY DISCLAIMSANYIMPLIEDWARRANTIESORMERCHANTABILITYORFITNESS FORA SPECIFIC PURPOSE ANDWILL
NOTBELIABLEFORANYDIRECT,INDIRECT,INCIDENTALORCONSEQUENTIALDAMAGES.
FLIR’s total liability is limitedto repairor replacement of theproduct. The warranty set forthabove is inclusive and no other warranty,whether
writtenororal,isexpressedorimplied.Toreadtheentire2(two)yearwarrantyagreementpleasevisitwww.flir.com/test/warranty
ForTechnicalSupport:emailTMSupport@flir.comorcall+1855‐499‐3662
7