5
USER MANUAL # 4204190 - Rev 1
SECTION 2. GETTING STARTED
2.1 UNPACKING AND INSPECTING
The FLIR SCOUT TK Series camera is available with the
features, options, and accessories described in this manual.
Refer to the packing list enclosed with your camera to
determine the actual contents of your camera package.
In addition to the camera the following items are included in
the camera package:
Lanyard
Quick Start Guide Thank You Card
USB Cable
2.2 CHARGING THE CAMERA
The camera’s battery should be fully charged prior to use.
Note: The battery is not user replaceable.
TO CHARGE THE CAMERA’S BATTERY:
1. Lift the cover from the USB port.
2. Plug the cable provided with the FLIR SCOUT TK into the
camera’s USB port.
3. Plug the opposite end of the cable into a USB power source.
Indicator LED
The indicator LED ashes while charging. The color of the
Indicator LED is determined by the level of charge.
FLASHING LED COLOR LEVEL OF CHARGE
Red <10%
Amber 10-20%
Green (Long Flash) >20%
Green (Short Flash) 100%
LED COLOR LEVEL OF CHARGE
Red <10%
Amber 10-20%
Green >20%
During normal operation the color of the indicator LED shows
the battery’s level of charge.
• FCC Declaration of Conformity
• CE Declaration of Conformity
1.800.561.8187 info@FLIR-Direct.ca
FLIR-DIRECT.ca
To Next Page
Loading...
Need help?
Display
Power
Operating Environment
Weight and Dimensions
