○ Manual min: Using this mode, the bottom temperature level in the scale
can be changed by pushing the joystick up/down, while the top
temperature level remains fixed.
○ Manual max: Using this mode, the top temperature level in the scale can
be changed by pushing the joystick up/down, while the bottom tempera-
ture level remains fixed.
2. Push and hold the button until you hear a clicking sound to autoadjust the
image.
A9 Archive button: Push to open/close the image gallery.
A10 On/Off button: Push to turn on/turn off the camera. Allow 45 seconds for the
start-up sequence.
A11 Hand strap.
© 2012, FLIR Systems, Inc. All rights reserved worldwide.
9
Publ. no. T559755, rev. 000
To Next Page
Loading...
