To Next PageTo Next PageHow to fix low contrast on my FLIR thermal camera LCD?
If your FLIR thermal camera LCD displays an image with low contrast, the LCD contrast might be set too low. Try adjusting the contrast of the LCD.
Why doesn't the trigger button work as expected on my FLIR thermal camera?
If the trigger button on your FLIR thermal camera isn't working as expected, its function may have been accidentally changed. Try changing the function of the trigger button back to the desired setting.
What to do if the trigger button does not work at all on my FLIR thermal camera?
If the trigger button on your FLIR thermal camera isn't working at all, it may have been accidentally disabled. Try enabling the trigger button in the settings.
How to correct the date & time on my FLIR thermal camera LCD?
If the LCD on your FLIR thermal camera is not displaying the correct date and time, the camera may have been set to the wrong date and time. To correct this, change the date and time settings in the camera's menu.
What to do if the FLIR thermal camera LCD displays no image?
If the LCD on your FLIR thermal camera isn't displaying an image, there could be several reasons. First, the camera or LCD might have been switched off automatically due to settings. Try pressing the PWR/NO button to switch it on. Also, check if a fully charged battery is inserted, or if the battery is depleted, charge it. If you're using a power supply, ensure the connector is properly inserted into the camera and that the mains plug and cable are correctly plugged in.
Why is my FLIR thermal camera LCD displaying an image of poor quality?
If your FLIR thermal camera's LCD shows an image of poor quality, the level or span may need adjustment. Try changing the level and span. Also, the camera may need to be autoadjusted, so perform an autoadjust maneuver. If the target's temperature is outside the current range, switch to a more suitable range if your camera has one. Finally, consider that a different palette might be better for imaging the target; try changing the palette.
What to do if my FLIR thermal camera LCD displays a blurry image?
If the LCD on your FLIR thermal camera displays a blurry image, the target may be out of focus. Try focusing the camera by rotating the focus ring on the lens.
General| Resolution | 320 x 240 pixels |
|---|---|
| IR Resolution | 320 x 240 pixels |
| Infrared Resolution | 320 x 240 pixels |
| Focus | Manual |
| Detector Type | Uncooled microbolometer |
| Digital Camera | Yes |
| Spectral Range | 7.5 – 13 µm |
| Accuracy | ±2 °C or ±2% |
| Image Frequency | 50/60 Hz |
| Frame Rate | 50/60 Hz |
| Display | LCD |
| Digital Camera Resolution | 640 x 480 pixels |
| Laser Pointer | Yes |
| File Format | JPEG, BMP |
| Battery Type | Li-ion rechargeable |
| Battery Life | 4 hours |
| Battery Operating Time | 4 hours |
| Video Output | PAL/NTSC |
| Operating Temperature | -15°C to +50°C |
| Thermal Sensitivity | <0.07°C at 30°C |
| Thermal Sensitivity/NETD | <0.07°C at 30°C |
| Temperature Range | -20°C to +350°C (-4°F to +662°F) |
| Field of View | 25° × 19° |
