FLIR ThermaCAM E320 - Changing Date & Time

ActionStep
Press MENU/YES to confirm your changes and leave the dialog box.5
8.7.5 Changing date & time
ActionStep
Press MENU/YES to display the vertical menu bar.1
Point to Date/time on the Setup menu and press MENU/YES.2
Press the navigation pad up/down to select year, month, day, hour, minute and
second.
3
Press the navigation pad left/right to change each parameter.4
Press MENU/YES to confirm your changes and leave the dialog box.5
8
Publ. No. 1558407 Rev. a155 – ENGLISH (EN) – February 6, 2006 51
8 – Tutorials