ExplanationCommand
Point to Image description and press MENU/YES to display the
Image description dialog box. Using this feature, you can add a
brief description to an image one of the following ways:
■
By sending a Pocket Word file (*.psw) from a PDA to the camera,
using the IrDA infrared communication link
■
By letting the camera read any value of the first label in a standard
FLIR Systems *.tcf file (text comment file) located in the camera
file system, and use this value as the image description
The image description can be read out by other software – e.g.
ThermaCAM™ QuickView.
➲ For information about how to create files for image descriptions,
see section 8.5 – Creating files for image descriptions on page 48
Image description
➲ Approx. >80 radiometric JPG images can be saved.
10.4.9 Setup
10383003;a4
Figure 10.15 Setup menu
10.4.9.1 Settings
10567203;a2
Figure 10.16 Settings dialog box
Figure 10.17 Explanations of the Settings dialog box
ExplanationValueLabel
■
Select On to display the scale on the screen
■
Select Off to hide the scale
■
On
■
Off
Scale
10
74 Publ. No. 1558407 Rev. a155 – ENGLISH (EN) – February 6, 2006
10 – Camera program
To Next Page
Loading...
Need help?
General
