Flite 2 Series - Arming the motor

38
Arming the motor
Fliteboard uses a safety lock to guarantee that riders cannot
accidentally spin the propeller by bumping the throttle trigger
unintentionally. Riders must arm (unlock) the motor to Fliteboard.
1 To arm the motor, pull the throttle all the way in on the Flite
Controller and then release it completely.
2 Press and then release the minus button.
3 Pull the throttle trigger within 5 second countdown window to
activate the propeller. Always verify the propeller is clear and in a
safe location before activating the motor
IMPORTANT: NEVER RUN THE MOTOR OUT OF WATER FOR MORE
THAN 3 SECONDS, AS DOING SO CAN OVERHEAT AND DAMAGE
THE PROPELLER SHAFT AND SEALS.
2
1
3
Countdown window
appears pull the throttle
trigger completely to
activate propeller