FloPlast AF32 - 12.0 Technical Investigation - Tests; Test Procedures and Criteria; 13.0 Technical Investigation; Quality and Testing Assurance

10
12.0 Technical Invesgaon – Tests
12.1 Tests were carried out and the results assessed against BS EN 12380: 2002 to deternine:
• impact resistance (drop test)
• airghtness aer endurance at negave temperature
• airghtness before and aer endurance at posive temperature
• opening pressure
• airow capacity
13.0 Technical Invesgaon
13.1 The manufacturing process applied to these products are controlled with FloPlast BS EN ISO 9001: 2015 Quality
Management System (Cercate No. FM501414). These processes are regularly audited by representaves of BSI to
ensure connued compliance with our detailed processes.
13.2 FloPlast’s valves are subject to type tesng and audit test as deterrmine with the Kitemark scheme to which they
are cered, (Cercate KM512474). Tesng is undertaken on behalf of BSI at the Building Research Establishment also
known as BRE.
14.0 Bibliography
BS 4514 : 2001 Unplascized PVC soil and venlang pipes of 82.4 mm minimum mean, outside diameter and ngs
and accessories of 82.4 mm and of other sizes — specicaon
BS 5255: 1989 Specicaon for thermoplascs waste pipe and ngs
BS EN 1329-1: 2014 Plascs piping systems for soil and waste discharge (low and high temperature) within the building
structure — Unplascized poly(vinyl chloride) (PVC-U)
BS EN 1455-1: 2000 Plascs piping systems for soil and waste (low and high temperature) within the building structure.
Acrylonitrile-butadiene-styrene (ABS). Specicaons for pipes, ngs and the system
BS EN 1565-1; 2000 Plascs piping systems for soil and waste discharge (low and high temperature) within the building
structure — Styrene copolymer blends (SAN + PVC) — Specicaons for pipes, ngs and the system
BS EN 1566-1 : 2000 Plascs piping systems for soil and waste discharge (low and high temperature) within the building
structure — Chlorinated poly(vinyl chloride) (PVC-C) — Specicaon for pipes, ngs and the system
BS EN 12056-1 : 2000 Gravity drainage systems inside buildings — General and performance requirements
BS EN 12056-2 : 2000 Gravity drainage systems inside buildings — Sanitary pipework, layout and calculaon
BS EN 12380: 2002 Air admiance valves for drainage systems — Requirements, test methods and evaluaon of
conformity
BS EN ISO 9001 : 2015 Quality management systems — Requirements