FBK 4 C2
GB│IE│NI
│
3 ■
Strimmer/cutting blade attachment FBK 4 C2-2
2 x bolts (with snap ring, washer and nut)
Blade guard
3-section cutting blade
Strimmer with cutting filament
Front boom (strimmer/3-section cutting blade)
Locking pin
Drive shaft
Extension attachment
Boom
Screw grip
Locking pin
Drive shaft
Accessories
Carrying strap
Protective cover for blade
Chain guard
Organic chain oil
Oil/petrol mixing canister
Safety goggles
Hex key 4 mm
Hex key 5 mm
Open-ended spanner SW 8/10
Spark plug wrench/flat-blade screwdriver
Tool bag
Nut M10 x 1.0 (left-hand thread)
Pressure plate cover
Pressure plate
Drive plate
Cutting filament
Package contents
1 engine unit
1 hedge trimmer attachment FBK 4 C2-3 (hereinafter hedge trimmer)
1 pole pruner attachment FBK 4 C2-4 (hereinafter pole pruner)
1 strimmer/cutting blade attachment FBK 4 C2-2
1 extension attachment
1 handle with barrier bar
1 strimmer with cutting filament
1 cutting filament (filament Ø: 2.4 mm/filament length: 6 m)
1 3-section cutting blade
1 Carrying harness
1 chain guard
1 blade guard
1 oil/petrol mixing canister
1 100 ml organic chain oil
1 tool bag
1 4 mm hex key
1 5 mm hex key
1 spark plug wrench/flat-blade screwdriver
1 SW 8/10 open-ended spanner
1 pair of safety goggles
1 operating instructions
Technical data
Engine unit: FBK 4 C2-1
Engine type: 2-stroke engine, air-cooled, chrome cylinder
Engine output (max.): 1.35 kW/1.85 hp
Cylinder capacity: 42.7 cm³
Engine idle speed: 3000 min
-1
(rpm)
Max. engine speed
with 3-section cutting blade: 9200 min
-1
(rpm)
with strimmer: 8700 min
-1
(rpm)
with chainsaw: 9200 min
-1
(rpm)
with hedge trimmer: 9200 min
-1
(rpm)
Max. cutting speed
with 3-section cutting blade: 6900 min
-1
(rpm)
with strimmer: 6525 min
-1
(rpm)
with chainsaw: 20 m/s
with hedge trimmer: 1550 min
-1
(rpm)
Ignition: electronic
Drive: centrifugal clutch
Weight:
(empty tank): approx. 5.6 kg
Fuel tank capacity: 1200 cm
3
Spark plug: CDK L8RTC
Fuel consumption at
max. engine performance: 0.6 kg/h
Specific
fuel consumption
at max. engine performance: 446 g/kWh
Hedge trimmer: FBK 4 C2-3
Cut length: 425 mm
Tooth spacing: 20 mm
Weight
(ready for use): approx. 2.24 kg
Pole pruner attachment: FBK 4 C2-4
Weight (ready for use): approx. 1.6 kg
Oil tank, recommended fill level: 140 cm
3
Cut length: approx. 260 mm
Blade: Oregon type 100SDEA318
Saw chain: Oregon 91P040X
Strimmer/cutting blade
attachment: FBK 4 C2-2
Strimmer with cutting filament (IAN 296309):
Filament cutting circle Ø: 430 mm
Filament length: 6.0 m
Filament Ø: 2.4 mm
3-section cutting blade (IAN 296309):
Cutting blade cutting
diameter Ø: 255 mm
To Next Page
Loading...
