To Next PageTo Next Page
Need help?Do you have a question about the FlorCraft 709-3930 and is the answer not in the manual?
Detailed safety rules to follow before and during operation.
How to position the saw near outlets to prevent water contact.
Detailed instructions on grounding, outlets, and cord usage.
Guidelines for selecting and using extension cords with the saw.
Detailed safety guidelines for operating the tile saw.
Instructions on how to unpack the saw and its components.
Instructions for unfolding and setting up the saw's stand.
Steps for installing the motor frame assembly onto the support arm.
Instructions for attaching the wheels to the base frame.
Steps to mount the cord hanger and tool caddy onto the motor support arm.
Detailed procedure for installing the diamond blade.
Steps for installing the water pump and connecting tubing.
Instructions for attaching the rear water collection tray.
How to install the front and side extension tables.
Information on adjusting the extension table for different tile sizes.
Guidelines and warnings for cutting tile and stone.
How to check if the blade is properly aligned with the cutting table.
Step-by-step guide to align the saw blade correctly.
Instructions for making straight cuts on tiles.
Steps for performing diagonal cuts on tiles.
How to perform plunge cuts using the tile saw.
Guide for making bevel and miter cuts with the saw.
Instructions on how to safely move the tile saw.
Routine cleaning procedures to maintain the saw.
Steps for maintaining and troubleshooting the water pump.
Information on blade types and essential safety precautions.
Causes and solutions for the saw overheating.
Troubleshooting steps for when the saw fails to start.
Diagnosing and fixing problems with water flow from the pump.
Solutions for a cutting table that does not slide smoothly.
General