FLOS ROMEO MOON/SOFT F

To Next Page

INSTRUCTION FOR CORRECT INSTALLATION AND USE

WARNING!

The safety of this appliance can only be guaranteed if these instructions are followed during installation and use. Therefore,

please keep a copy of these instructions for later reference.

REMARKS

- Make sure the mains power supply has been disconnected before installing the appliance or carrying out any work on

it.

- If not familiar with electrical connections, contact a qualified electrician.

- The appliance may in no way be modified or tampered with, any modification may compromise safety causing the

appliance to become dangerous. FLOS declines all responsibility for products that are modified.

TECHNICAL DATA

USA VERSION - Halogen incandescent lamp Max. 150W E26 coupling type T.

120V VERSION - Halogen incandescent lamp Max. 250W E26 coupling type T.

JAP VERSION - Halogen incandescent lamp Max. 250W E26 coupling type T.

CLEANING INSTRUCTIONS

- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.

Warning: do not use alcohol or other solvents.

02-28-06 Cod.08090

ROMEO MOON/SOFT F

FLOSUSA

UL Listed

C-UL Listed

Fig.1

Fig.2

Fig.3

Fig.1 Loosen the three screws on the steam base (A). Insert the screws into keyhole slots in base (B) and turn clockwise.

Tighten the three screws securely.

Fig.2 Take the fixture stem and pass the cord (C) with dimmer through the hole of the base plate. Feed the cord (C) through

the slot in the base and then snap the cord (C) into the clip. Place the fixture on the floor.

Fig.3 Position the plastic ring (D) onto the three support arms (E). For the Romeo Moon glass shade, use the flat-head

screws (F) to fasten the plastic ring (D) to the support arms (E).

Need help?

Do you have a question about the FLOS ROMEO MOON/SOFT F and is the answer not in the manual?

Summary

Instructions for Installation and Use

Safety and General Advice

Important safety warnings and general remarks before proceeding with installation or maintenance.

Technical Data

Specifications for lamp type, maximum wattage, and coupling type for different regional versions.

Cleaning Instructions

Guidelines for cleaning the appliance using a soft cloth and mild cleanser, avoiding solvents.

Installation Procedure

Step-by-step visual guide for mounting the fixture, connecting components, and attaching the shade.

This document describes the FLOS ROMEO MOON/SOFT F lighting fixture, providing instructions for its correct installation and use. It outlines the function, technical specifications, usage features, and maintenance guidelines for the device.

Function Description:

The FLOS ROMEO MOON/SOFT F is a lighting fixture designed for indoor use. Its primary function is to provide illumination using halogen incandescent lamps. The fixture is available in two main aesthetic variations: the "Romeo Moon" with a glass shade and the "Romeo Soft" with a fabric shade, each offering a distinct visual and light diffusion quality. The design allows for secure mounting and easy assembly of the various components, including the shade, diffuser, and light bulb. The fixture is designed to be placed on the floor, indicating it is a floor lamp.

Important Technical Specifications:

The fixture is designed to operate with halogen incandescent lamps. The specific lamp wattage and coupling type vary slightly depending on the regional version:

USA VERSION: Requires a halogen incandescent lamp with a maximum wattage of 150W and an E26 coupling type T.
120V VERSION: Requires a halogen incandescent lamp with a maximum wattage of 250W and an E26 coupling type T.
JAP VERSION: Requires a halogen incandescent lamp with a maximum wattage of 250W and an E26 coupling type T.

It is crucial to use the specified lamp types and wattages to ensure safe and optimal operation. The fixture is UL Listed and C-UL Listed, indicating compliance with safety standards for electrical products in the United States and Canada, respectively.

Usage Features:

The installation and assembly process is detailed, highlighting several key usage features:

Secure Base Mounting: The fixture features a robust base assembly. Installation begins by loosening three screws on the "steam base" (A), inserting them into keyhole slots in the main base (B), turning clockwise, and then securely tightening them. This mechanism ensures the stability of the floor lamp.
Cord Management: The fixture incorporates a design for neat cord management. The cord (C) with the dimmer passes through a hole in the base plate, then through a slot in the base, and is finally snapped into a clip. This keeps the cord organized and prevents it from being a tripping hazard.
Shade and Diffuser Assembly (Romeo Moon):
- For the "Romeo Moon" version, a plastic ring (D) is positioned onto three support arms (E). Flat-head screws (F) are used to fasten this plastic ring to the support arms.
- The glass shade (P) is then placed onto the plastic ring (D).
- A glass disc (M) is firmly positioned into the glass shade, likely acting as a diffuser or decorative element.
- The light bulb (I) is inserted into the socket.
Shade and Diffuser Assembly (Romeo Soft):
- For the "Romeo Soft" fabric shade, pin screws (G) are used to fasten the plastic ring (D) to the support arms (E).
- An internal diffuser cone (H) is inserted.
- The fabric shade (N) is attached by unscrewing small fixing rollers (Q) from hooks (R) of the fabric crown. The three hooks are located into large, closed bottom holes in the plastic ring (D), and then the fixing rollers are screwed back up to secure the shade.
- A glass disc (O) is positioned onto three locating pins, likely serving as a bottom diffuser or decorative element for the fabric shade.
- Finally, the light bulb (I) is inserted, and the fixture is plugged in.
Safety Precautions: The manual emphasizes several critical safety warnings:
- Always disconnect the mains power supply before installation or maintenance.
- If unfamiliar with electrical connections, a qualified electrician should be consulted.
- The appliance should not be modified or tampered with, as this could compromise safety and render the product dangerous. FLOS disclaims responsibility for modified products.
- The safety of the appliance is guaranteed only if these instructions are followed.

Maintenance Features:

The maintenance instructions are straightforward and focus on cleaning:

Cleaning: The appliance should be cleaned using only a soft cloth. This cloth can be dampened with water and soap or a mild cleanser if necessary to remove resistant dirt.
Warning: It is explicitly stated not to use alcohol or other solvents for cleaning, as these could damage the fixture's finish or materials.

In summary, the FLOS ROMEO MOON/SOFT F is a versatile floor lamp available in two distinct styles, designed for ease of assembly and safe operation, with clear guidelines for installation, usage, and basic cleaning. Its compliance with UL and C-UL standards underscores its commitment to safety.