17
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.8
Adjust the height of the rod (B) and then fasten the knob (A).
Wrap the excess cable around the cable winding support (H).
B
A
H
REV. 2
DATE 25/11/2021
RF02775
ROD
TOIO F7600035