35
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
B
Adjust the height of the rod (B) and then install the knob (A) by
tightening it.
RF06732
NICKEL KNOB
A
REV. 2
DATE 25/11/2021
TOIO F7600035