4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Fig.2
RF02774
NICKEL-PLATED BRASS CAGE
Unfasten the screw (E) and free the damaged
bulb cage (A) from the rod (B).
Assemble now the new spare-part:
Place the lamp bulb cage (A) on the rod (B),
ensuring that the insert (C) present on the
cage (A) hooks inside the opening (D) of the
rod (B).
Lock the cage (A) to the rod (B) by fastening
the screw (E).
REV. 2
DATE 25/11/2021
TOIO F7600035
E
B
A
D
C
To Next Page
Loading...
