Need help?Do you have a question about the Flotrol F20 SVE and is the answer not in the manual?
Details regarding the equipment supplier, including address and contact information.
Recording of influent water quality parameters like pressure, hardness, turbidity, and chemical content.
Details about the water treatment equipment, including tank dimensions and media types.
Configuration of regeneration start, capacity, days override, and cycle programming.
Explanation of the service and regeneration displays on the control valve unit.
Description of the functions of the regeneration button and up/down arrows.
Key considerations for valve installation including location, servicing, hydraulics, plumbing, and electrical requirements.
Procedures for installing the valve, including tank connection and riser tube placement.
Detailed steps for replacing the injector screen and the brine valve assembly.
Procedure for disassembling and replacing the piston assembly, including seals and spacers.
Explanation of error codes displayed on the unit and their probable causes.
Details on the valve material, port sizes, and flow rates.
Information on service and backwash flow rates, including Cv values.
Specifications for brining system, electrical, pressure, and running water temperature.
Details on injector models, flow controllers, and regeneration start options.
General| Brand | Flotrol |
|---|---|
| Model | F20 SVE |
| Category | Control Unit |
| Language | English |
To Next Page
