1. Drawing, Brief Description, Explosion Protection, Function of a Mechanical Seal ......2
2. Safety ...............................................................3
3. General ..............................................................4
4. Transport, Storage ......................................................5
5. Equipment Check .......................................................5
6. Mechanical Seal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 Installation of Cartridge Type Seal with Setting Plates........................8
6.2 Installation of a Cartridge Type Seal with Centring Tabs ......................9
6.3 Installation of a Component Type Seal...................................10
6.4 Installation of Seals with Hooked Type Sleeves ............................11
7. Piping Instructions .....................................................12
8. Performance Testing of Pumps ...........................................12
9. Functional Recommendations.............................................13
10. Shut Down, Disassembly ................................................14
11. System Check ........................................................15
12. Spare Parts, Repair.....................................................15
These installation instructions can be used for the following seal types:
Pusher seals: Allpac 4 Series, Allpac N Series, Centipac 1 Series, CRO, D Series, DHT Series,
Europac 306, Europac 6 Series, FRO, GSD, GSL, HD Series, HSC, ISC2-682
Series, LD, P Series, Q Series, RO, Simpac 3 Series, SRO, U Series, UHT
Series.
Bellows seals: BRC Series, BX Series, BXH Series, BXLS Series, BXRH, CBR Series, CBS,
GSDH, ISC2-682 Series, PBR, PBS, X Series.
General Installation and Maintenance Instructions
for Machinery Components
USER INSTRUCTIONS
-Original Instruction-
Table of Contents page no.
Experience In Motion
To Next Page
General