DANGER
Ball valve must be depressurized!
Operate the ball valve to allow trapped pressure to escape.
Beware extreme surface temperature!
DANGER TO LIFE
Pay attention to hazardous substances!
Risk of explosion, fire, poisoning or caustic burns!
WARNING
Repair welding or connection welding on pressure equipment is not
permitted.
7.3 Returning the Ball Valve: “Valve Information Sheet”
According to the Flowserve Returned Goods Safety Procedure ball valves, which are returned to Flowserve, must be
free of dangerous fluid residues. The sender will receive from Flowserve a form, which must be filled-in and signed by
the responsible organization and which must clearly attest the fact that the valve does not pose any risk to persons or
to the environment when it is delivered and/or during and after disassembly.
Flowserve can only accept a return, if the completed and bindingly signed Flowserve form accompanies the
delivery.
To Next Page
Loading...
