4
2.2 General Safety
When installing, operating and maintaining this system, pay particular attention to
safety:
• Obey all applicable safety laws and regulations.
• Obey all Plant regulations.
• Make sure that only trained and qualified personnel work on the system.
Refer to section 2.3.
• Read and understand each part of this manual.
• Follow the installation, operation, and maintenance procedures exactly.
•
Wear the relevant Personal Protective Equipment (PPE). Refer to section 2.4.
• Never work alone if there is a possibility of an accident.
• Make sure that adequate safety equipment is installed in and around
the work area: first aid kits, safety showers (if applicable), fire extin-
guishers, escape routes, shut off valves, etc.
• Make sure that personnel are fully trained on how to use the safety
equipment. A qualified first aid specialist must always be available for
each shift.
• Read the Plant requirements for handling hazardous materials
2.3 Trained and Qualified Personnel
Qualified personnel are people who have been authorized by those responsible
for the safety of the Plant to perform the necessary work, and who can recognize
and avoid possible dangers. The following aspects determine the qualification of
personnel:
• Appropriate training
• Relevant experience
• Knowledge of relevant standards and specifications
• Knowledge of accident prevention regulations
• Knowledge of plant regulations and operating conditions
2.4 Personal Protective Equipment (PPE)
When operating or maintaining this system, make sure you wear the appropriate
Personal Protective Equipment (PPE): protective clothing, gloves, safety glasses,
etc.
WARNING
HOT SURFACES: The system and surrounding surfaces might be hot.
Take care when touching components. Wear the appropriate Person-
nel Protection Equipment (PPE), according to plant regulations
To Next Page
Loading...
Need help?
General
