EasyManua.ls Logo

Flowzone CYCLONE 2 - Post-Spraying Procedures; Step 3: Cleaning and Storage

Flowzone CYCLONE 2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After you nish spraying:
STEP 3.
Rise out the solution you sprayed with water and spray water through the sprayer
for 3-5 minutes to completely rid the tank of the chemicals.
NOTE: Many spray materials will harden if left in the sprayer and clog the nozzle or hose. Never use
gasoline to clean out the sprayer.
Disconnect the hose from the gun and let the hose hang down towards the
ground in order to drain the hose of any liquid.
Dry sprayer tank.
Clean the nozzle.
Store the sprayer in a clean, empty, and shaded location protected from extreme
heat or frost.
For long-term storage, regular discharging and charging of the battery is required
(at intervals of every 2 weeks, every month, or every two months) to maximize
battery life.
1.
2.
3.
4.
5.
6.
C YCLONE 2
ª
5
Copyright © WESSOL, LLC

Related product manuals