TYPHOON 2.5 OPERATION GUIDE
Preparing to spray
1. Fully charge the battery prior to
the rst operation.
Note: the indicator lights will ash green
while charging. Solid green lights mean
the battery is fully charged.
2. In a separate container, prepare
the solution you wish to spray
according to the manufacturer’s
instructions. Open the tank lid
and carefully pour the solution
through the tank strainer.
Securely tighten the tank lid.
3. Determine the nozzle you want to
use (see right) and insert it into the
spray wand or spray gun by pulling
back on the collar of the quick-
connect tting. Remember to
push the collar back into position.
a) Adjustable cone nozzle: ranges
from jet stream to conical mist.
b) Green fan nozzle: at 25˚ fan
c) Red jet nozzle: 0˚ narrow stream
4. Begin spraying by squeezing the
spray trigger.
To Next Page
Loading...
