Assembly Tips:
– Keep all packaging until assembly is complete to
ensure you have all parts needed for assembly.
– Assemble on a soft surface, like a rug or
cardboard to protect the finish.
– Two people are recommended for assembly.
– If your floor is uneven, you can use the provided
felt pads to level your Shelving System. The
felt pads can be stacked on top of each other to
add more height on one or more Wood Supports
as needed.
– WARNING: Serious or fatal crushing injuries can
occur from furniture tip-over. The Wall Anchor Kit
should be installed to help prevent tip-over for
the Tall Shelf, Wardrobe, and Display Shelf.
To Next Page
Loading...
