Fluance PA10 - Specifications

Specifications
Audio Specications
Gain 38 dB
Audio Circuit Type Passively Equalized RIAA
Compatible Sylus MM
Phono Input Sensitivity 30 mV
Total Harmonic Distortion (THD) 0.004%
Signal/Noise (S/N) Ratio > 90 dBA
Noise Floor (unweighted) < 220 uV
RIAA Equalisation Accuracy (deviation) 20 Hz ~ 20 kHz +/-0.5 dB
Input Impedance 47 kohm
Input Load Capacity 100 pF
Output Impedance 100 ohm
Output Voltage 2.2 V
Maximum Input 100 mV
Maximum Phono Stage Output 125 mV
High Pass Filter Cutoff 20 Hz
Crosstalk (20-20000 Hz) -86 dB
Dynamic Range > 85 dB
Input/Output Specications
Input RCA L/R (Gold Plated)
Output RCA L/R (Gold Plated)
Ground Terminal Yes
Cabinet Specications
Cabinet Material MDF
Finish PVC Wood - Black
Power Specications
Power Input 110-240 V ~ 50/60 Hz 0.5 A
Power Output 24 V, 500 mA
Power Consumption 0.4 W
General Specications
Dimensions 4 x 2.25 x 3.6 inches
Weight 11.5 oz (325 g)